How to Disarm DSC PowerSeries Neo Touchscreen Keypad

Disarming Your DSC PowerSeries Neo Alarm - A Step-by-Step Quick Guide for Employees

Welcome back to the office! As you enter, the alarm system will activate, requiring you to disarm it to prevent it from sounding.

To avoid any disruptions and ensure a smooth start to your workday, here’s a quick guide on how to disarm your DSC PowerSeries Neo alarm system using the touchscreen keypad and your user code (0107):

Step 1: Wake Up the Keypad

The touchscreen may be in sleep mode. Simply tap the screen to wake it up.

Step 2: Locate the Disarm Icon

Look for the disarm icon on the home screen. It often resembles an open lock or a hand with an open palm.

Step 3: Tap the Disarm Icon

Gently touch the disarm icon on the screen.

Step 4: Enter Your Code (0107)

The keypad will prompt you to enter your 4-digit code. Carefully type in 0107.

Step 5: Press Enter (or OK)

After entering the code, press the Enter or OK button to confirm.

You should hear a chime, and the screen will likely display a confirmation message. Your alarm system is now disarmed!

Important Reminders:

Code Accuracy: Double-check your code before pressing Enter. Entering the wrong code repeatedly may temporarily lock you out of the keypad.
Alternative Codes: If your code doesn’t work, try another valid employee code or contact your security administrator for assistance.
System Variations: Your touchscreen layout may vary slightly. If you’re unsure, refer to your system’s user manual or ask for help.

Troubleshooting Tips:

If the keypad doesn’t respond, try waking it up again.
If you experience persistent issues, contact your security administrator or alarm system installer.